The transport of equipment across country relies on the security of the rigging. In fact, the security of the rigging is the one of the most important items in the checklist before the transport begins. Since damage can occur with unreliable rigging, these items should be checked before transport occurs. Any worn or torn rigging should be replaced as soon as possible.
One of the items to check with Rigging in Austin is the condition of the straps. The straps are what bear the brunt of the weight on the machinery being shipped. Worn straps will give way under high stress conditions such as shifts in the load or hard bumps that can cause them to split. Each strap should be checked individually before it is secured to the load. In addition, strap lines should be secured away from sharp edges or near anything that can cause them to fray during the trip.
Another item to check is the security of the locking mechanism. This is what holds the straps in the proper position. If the mechanism does not lock properly into place, it needs to be repaired or replaced. Sticking locks can also cause issues when the straps need to be removed. This item should be tested to ensure that it is locking and disengaging properly.
The connection of the strap to the hooks is another area to inspect. Since this part of the Rigging in Austin is usually secured with heavy threading, it must be checked to ensure it is still strongly connected. Any unraveling of the thread can cause issues that can result in breakage of the rigging. The hooks should also be inspected to ensure that they can adequately grip onto the supports and are not bent or misshapen. These hooks need to be replaced if they have been damaged.
These are the things that should be inspected in the rigging for the security of the load. Maintaining the integrity of the rigging will help ensure that the load reaches its destination safely. If there are any signs of damage, the rigging must be replaced before the load is shipped.
