Making sure that a home’s Air Conditioning Gilbert is running efficiently is something that should be handled each year before summer starts. Many homeowners may prefer to have a company like Arizona Refrigeration Service Inc. handle this job for them. However, for those who wish to handle the job on their own, it can be easily accomplished with just a bit of time and energy.
Dirty air conditioning systems Gilbert can use much more energy than a clean one. This is because a dirty unit will need to work harder to keep a home cool. This can cause the unit to use more power, which can lead to higher energy costs. In addition, units that are continuously used in this way will start to have more repair issues and may even require replacement much sooner than a unit, which is kept clean.
Cleaning air conditioner in Gilbert is not difficult. Most systems have two separate units. The unit that is housed inside in the attic or utility closet can often be cleaned using a vacuum to clean in and around the unit. This unit is the blower and it has a motor and fan, which should be checked as well. The motor generally will have vents or grilles where dirt can accumulate. A stiff brush can generally remove this dirt. The fan should also be cleaned with the brush so that it can operate more efficiently as well.
The unit outside contains the compressor and condenser. This unit generally has a look similar to a radiator due to the coils that surround it. These coils can accumulate dirt and other matter, which can limit the amount of air that flows through them. This can make the unit less effective. Cleaning the coils can be done by using a garden hose with a high-pressure nozzle. When cleaning the coils it is important to avoid getting water on any of the electrical wiring or components. It is generally a good idea to cover them with plastic before proceeding. Some coils may be especially dirty and a household cleaner may be needed to get them clean.
This unit also has a series of metal slats as well. These slats or fins will also need to be cleaned. A soft brush is generally the best option for cleaning the fins.
