Most machine shops use a great deal of coolant in their operations and you can’t simply dump used coolant after it has been used. For maximum efficiency, a shop should have some kind of machine coolant filtration and recovery system. In fact, this will provide many important benefits.
What is a Recovery System?
During the process of cutting and machining metal, fluids are used to lubricate and keep cutting surfaces cool. Otherwise, excess heat would be generated and this can drastically lower the life of tools and equipment and also lower the quality of machining. But what happens to these liquids when they are contaminated with metal shavings, oil, water and other material from the shop?
Smaller shops might choose to properly dispose of used liquids, but this is not a cost effective measure. Instead, it’s best to use some of kind of machine coolant filtration and recovery. This way, cutting fluids can be cleaned, filtered and used time and time again. This is what a recovery system is all about.
Cost Savings
There are initial expenses to buy the equipment and install it. However, before long, most shops can save a great deal of money, because they are not continually buying fresh fluids. In addition, used fluids must be properly disposed of and this is another expense to consider. It should not take long for the average shop to notice the cost savings benefits of machine coolant filtration.
Cleaning
A well designed machine coolant filtration system is constantly working and keeping fluids clean, and it’s much more than just a cleaning system. They have the ability to filter out all kinds of contaminants. Plus, some systems effectively separate oil from water and help to keep cooling fluid at just the right concentrations.
80 Percent Efficiency
Effective recovery systems can reduce cutting fluid costs by as much as 80 percent. This is an enormous savings over standard disposal methods.
Better Productivity and Quality
Because your fluids are always clean and in the right concentrations, it’s easier for your machinists to work. There are fewer chances for mistakes and you might also notice increased production.
Low Maintenance
Top machine coolant filtration and recovery systems are easy to use and there is little maintenance required.
Which Company Should You Use?
When shopping for recovery systems, consider companies with decades of experience. Also it’s best to choose a manufacturer who specializes in serving the needs of the metalworking industry. This ensures high quality and dependability.
